Noah's Ark
Noah's Ark
DimensionsL 230mm high X 160mm X 345mm wide
How to Build Your Ark
1. Firmly tap one red wheel onto the end of the red shaft. It is a tight fit, so persist, just be careful to tap straight down and do not snap the shaft.
Repeat with another wheel on the second shaft. Do not put both wheels onto the shafts, yet!
2. Insert the barrel bolts into the large pre-drilled holes on the front piece, the bow, of the ark. It is the smaller green panel with the string. Make sure the string faces outwards and the groove is at the bottom.
3. Take a green side wall of the ark, groove facing inwards. To fasten the side piece to the bow, place screws through the hole, through the barrel and screw all the way into the bow. Repeat with the lower screw. Connect the other side piece to the bow and fasten with the screws.
4. Slide the green base plate into the grooves. Place the end piece, the stern, onto back and screw into place, as before.
5. Now, slot the wheelshafts through the holes above the groove on the side pieces. Put the second wheel onto shaft anf firmly tap down.
Assemble the top of the Ark and let the animals on board.
